Signal Flex Connects to high impedance instrument or signal (amp, tape deck, etc.) to mixing board via low impedance (microphone type) cables or snake. Passive System requires no batteries.

Features
• Allows user to connect high impedance instrument or signal (amp, tape deck, etc.) to mixing board via low impedance (microphone type) cables or snake. Also allows more flexibility and control over the signal due to powered circuitry. Features a ground lift switch to eliminate grounding loops (which produce hum). Has -20dB or -40dB pad switch for signals that are too "hot" and distort. Is powered by 9 volt battery or power supply.	• Output Impedance: 600W
• Specifications:	• balanced XLR attenuation switch -40dB, -20dB, 0dB ground switch
• Frequency Response: 20Hz - 20 kHz +3dB	• Connected/lifted/floating DC input
• Input Impedance: 1MW, jack _ jack line	• 9V battery or 100mA, negative top power input
• Output Impedance: 600W	• Low battery LED (indicates at app

Details

Allows user to connect high impedance instrument or signal (amp, tape deck, etc.) to mixing board via low impedance (microphone type) cables or snake. Also allows more flexibility and control over the signal due to powered circuitry. Features a ground lift switch to eliminate grounding loops (which produce hum). Has -20dB or -40dB pad switch for signals that are too "hot" and distort. Is powered by 9 volt battery or power supply.

Specifications:

Frequency Response: 20Hz - 20 kHz +3dB

Input Impedance: 1MW, jack _ jack line

Output Impedance: 600W

balanced XLR attenuation switch -40dB, -20dB, 0dB ground switch

Connected/lifted/floating DC input

9V battery or 100mA, negative top power input

Low battery LED (indicates at approx 4.5V)